Raised-panel steel
Modern flush
LiftMaster openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPanel Replacement in Houston, TX
Garage door panel replacement in Houston typically runs $180 – $600 per panel depending on the door’s material, insulation, and whether the panel is still in production. We replace damaged panels same week in most cases, and we’ll always give you a written price before any work starts. If you’re looking at a dented, cracked, or weather-warped panel, call us at (903) 989-4180 and we’ll tell you over the phone whether replacement makes more sense than a full door swap. For a broader look at what we do across the city, see our Garage Door Repair in Houston page.
Houston’s humidity and storm season are hard on garage doors. A hail strike in Cypress, a runaway shopping cart in Sugar Land, a kid’s basketball gone wide in Memorial: the panel takes the hit, and suddenly the door looks rough and the curb appeal drops with it. Bramwell Garage Doors Houston has been working under the Kingswell standard since 2001, and we handle panel work as carefully as we handle our Garage Door Repair services.
When You Need Panel Replacement
Not every dented panel needs replacing. Here’s when it does:
- A visible crack or split in the panel surface. A crack lets Houston’s humid air into the panel core, which leads to warping and rot in wood doors and corrosion in steel.
- Hail or storm damage across multiple panels. After a Gulf Coast storm rolls through neighborhoods like Katy or Pearland, we see doors where two or three panels took direct hits. Replacing those panels beats replacing the whole door.
- A panel that’s bowing or twisting. When a panel loses its shape, the door binds in the tracks and the opener works harder than it should. That strain shortens opener life.
- A rusted-through bottom panel. The bottom panel sits closest to Houston’s damp concrete and flood-prone driveways. Once rust eats through, the panel loses strength and the weather seal stops seating.
- You’re selling the home. A damaged panel is one of the first things a buyer’s inspector flags on a Houston home. Replacing it before listing is cheaper than negotiating it in the closing.
- The door still works fine but the damage bugs you every time you pull into the driveway. That’s a legitimate reason. You live there.
If the door opener is also struggling after the damage, we can check that during the same visit. We service all major opener brands, including Genie and Chamberlain, and can handle Sensor Calibration during the same visit so you don’t need a second appointment.
Our Panel Replacement Process
Here’s exactly how a panel replacement works with us:
- You call (903) 989-4180. A live person answers. You describe the door and the damage, and we schedule a visit in a real arrival window that fits your day.
- A background-checked technician arrives in uniform, on time. No wondering who’s pulling into the driveway. Our technician inspects the door, the tracks, the springs, and the opener to confirm the panel is the real problem.
- You get a written price before any work starts. That number covers the panel, the labor, and any hardware needed to seat it correctly. If we find something else wrong, you’ll know before we touch it.
- We match the panel to your existing door. We work with Clopay, Amarr, and Wayne Dalton doors regularly, and we can order the right panel with the right color, texture, and insulation level. If the panel is discontinued, we’ll tell you plainly and talk through your options.
- We install the panel, re-balance the door, and test the full cycle. A door with a new panel has different weight distribution, so we check spring tension and opener limits before we call the job done.
- We clean up and hand you the written guarantee. The Kingswell Guarantee covers the repair in writing. If it fails inside the guarantee period, we come back and fix it at no charge.
Panel Replacement Pricing in Houston
Most single-panel replacements in Houston run $180 – $600, parts and labor included. The spread comes down to what your door is made of and how it’s built.
| Door Type | Typical Panel Cost (Parts + Labor) |
|---|---|
| Single steel panel, non-insulated | $180 – $320 |
| Double-layer steel panel with insulation | $300 – $500 |
| Wood or wood-composite panel, custom or stained | $400 – $900 |
| Full-view aluminum and glass panel | $350 – $750 |
| Bottom panel with new weather seal | $200 – $450 |
What moves the number:
- Panel availability. If the manufacturer still produces your door line, the panel is typically in our hands within a week. Discontinued panels cost more to source, or we’ll recommend a door replacement instead.
- Color matching. White and almond are usually stock items. Custom colors and wood finishes take longer and can add 10 – 25% to the panel price.
- Insulation level. A Clopay or Wayne Dalton door with a higher R-value uses a denser panel core, and that panel costs more than a basic non-insulated one.
- Damage to surrounding hardware. If the impact bent a hinge or knocked the door out of alignment, that work adds to the total. You’ll see every line on the written estimate before we start.
Every estimate is free. Call (903) 989-4180 and we’ll give you a straightforward range over the phone, then confirm it with a written price when the technician sees the door in person. No door-step price changes, no surprises.
Key Takeaways
- A single damaged panel doesn’t mean you need a whole new door. Panel replacement fixes the look and the function at a fraction of the cost.
- You’ll get a written price before any work starts, every time. It’s the Kingswell standard.
- We match panels to Clopay, Amarr, Wayne Dalton, and Genie doors, along with most other major brands.
- The repair is covered by the 365-Day Done Right Promise: if it fails within a year, we come back and fix it at no charge.
- We answer the phone 24/7. No voicemail tree, no next-business-day callback.
FAQs – Panel Replacement
Is it cheaper to replace one panel or the whole door?
Replacing one panel is almost always cheaper than a full door replacement, usually by several hundred dollars. A single panel runs $180 – $600, while a new installed door in Houston typically starts around $800 – $1,200 and goes up from there. If the door is 15+ years old, Spring Repair needs are likely coming soon, or panels on both sides are damaged, a new door may be the better long-term call. Call (903) 989-4180 and we’ll walk through the numbers for your specific door.
Can you match my existing door color and style?
Yes, in most cases we can match the panel to your existing door. If your door is a current Clopay, Amarr, Wayne Dalton, or Genie product, we order the exact panel in the right color, embossing pattern, and insulation level. For discontinued doors, we’ll give you honest options: a close match, a full set of panels in a new style, or a door replacement. We’ll show you samples before you commit.
How quickly can you replace a panel in Houston?
Most panels are installed within a week of your call. Common steel panels from major manufacturers are typically available in 2 – 5 business days. If your panel is in our Houston inventory, we can often do it same week. For a precise timeline on your door model, or to ask about Roller Replacement, call (903) 989-4180 with the brand and model number from inside the door panel, and we’ll check availability while you’re on the phone.
What if the new panel doesn’t match perfectly?
Slight color variation is possible if your existing door has years of sun exposure, since a new panel hasn’t faded the same way. We get the closest possible match from the manufacturer, and we’ll be upfront if the match won’t be perfect. In cases where color consistency matters more than cost, we may recommend replacing multiple panels or the full door. You’ll hear that from us before you spend anything.
Do you handle storm and hail damage claims?
We do. Houston homeowners file hail and storm claims regularly after Gulf Coast weather events, and we provide the documentation you need for your insurance company. We’ll photograph the damage, note it panel by panel, and give you a written estimate that’s easy to submit. You pay the technician when the work is done, and your claim gets processed with clear paperwork. Call (903) 989-4180 to schedule the damage assessment.
Call Bramwell Garage Doors Houston
If a dented or cracked panel is the only thing wrong with your door, you probably don’t need a full replacement. Call Garage Door Repair specialists at Bramwell Garage Doors Houston at (903) 989-4180. Marcus Ellery and the team will give you a straight answer on repair versus replacement, a written price before any work starts, and the Kingswell Guarantee in writing when the job is done.
Written by Marcus Ellery, Owner at Bramwell Garage Doors Houston, serving Houston.