Raised-panel steel
Modern flush
LiftMaster openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateClopay Garage Door Spring Repair in Houston: What to Know First
Clopay garage door spring repair in Houston typically runs $180 – $340 for a torsion spring replacement, parts and labor included, and most jobs are completed the same day we diagnose them. We’re an independent Clopay service provider, not a manufacturer affiliate, which means we fix what’s actually broken without pushing a full door replacement you may not need. If your Clopay door won’t lift, feels heavy, or made a sound like a gunshot from the garage, call us at (903) 989-4180 and we’ll walk you through what we’re seeing before we ever send a truck.
This page is for Houston homeowners with a Clopay door that’s suddenly dead weight. You’ll learn what usually fails, what it costs, and how we approach the repair so you’re not standing in a driveway wondering if the next quote will change at the door.
How Clopay Products Fail – and How We Fix Them
Clopay builds a solid door, but Houston does its level best to shorten the life of the hardware. Here’s what we see most often on Clopay doors across the city, from Clear Lake up through Spring Branch:
- Gallery Series torsion springs snapping at the 6-8 year mark. The Gallery line is popular in Houston for its steel construction, but the factory torsion springs are rated for a finite number of cycles. In a humid climate with daily open-and-close use, we see springs snap closer to the 7-year point than the 10-year point Clopay’s marketing materials suggest. The fix is a replacement pair, not a single spring, because the unworn spring is usually right behind the broken one in cycle count.
- Coachman Collection extension springs stretching unevenly. Coachman doors from their carriage-house line still use extension springs in some Houston installs. Those springs run along the horizontal track and lose tension gradually, so one side of the door sags before the spring actually breaks. We’ll catch it during an inspection and replace the pair before the door binds and bends a track.
- Ideal Door by Clopay (their value line) using lighter-gauge springs from the factory. We don’t fault anyone for the builder-grade choice, but the OEM springs on Ideal Doors are lighter than what we install as replacements. When they fail, we upgrade to a heavier-gauge spring rated for more cycles, which handles Houston’s heat-cycled garage environments better.
- TorqueMaster spring tubes on newer Clopay doors confusing homeowners. Some Clopay models hide the torsion spring inside a tube above the door, so there’s no visible coil to inspect. Owners hear a loud crack and then find a door that won’t move, but they can’t see what broke. We replace TorqueMaster systems with standard torsion spring conversions, which are easier to maintain and less expensive to service down the road.
- Corrosion on spring hardware in high-humidity neighborhoods. Along Buffalo Bayou and in areas like Meyerland where flooding has been a reality, the ambient moisture strips the coating off spring brackets faster than Clopay’s documentation would predict. We’ll replace the rusted brackets while we’re doing the spring job rather than letting them become next month’s failure.
Styles & brands we work with



Our Clopay Garage Door Spring Repair Process
- 1
Call us at (903) 989-4180. A live person picks up, day or night. We ask what the door did when it failed, which tells us a lot before we even arrive.
- 2
We show up in a stated window. Our technician arrives in uniform, walks the door with you, and points to exactly what broke. Not a vague “it’s the spring” but the specific spring, the bracket, the cable.
- 3
You get a written price before work starts. That number is the number on the invoice when we’re done. No gate fee, no surprise “well, since we’re here” upsell.
- 4
We replace parts with the right spec. On Clopay doors we’ll use OEM Clopay springs when the warranty picture favors it, and quality aftermarket springs when a higher cycle rating makes better sense for your door’s weight and how often it gets used. We walk you through that decision before we turn a wrench.
- 5
We test full travel, balance, and cycle count. The door should lift smoothly, hold mid-travel, and close without slamming. We run the opener through a few cycles while we’re still on site.
- 6
You get the Kingswell Guarantee in writing. What we fixed, what it cost, and how long we’re backing it. We leave the garage cleaner than we found it.
See the difference
Before
After
Before
After
Before
AfterWhat Clopay Garage Door Spring Repair Costs in Houston
Most Clopay torsion spring replacements in Houston run $180 – $340, including parts and labor. A broken spring on a standard 16×7 Clopay door falls near the middle of that range; a TorqueMaster conversion or a heavy wooden door from the Reserve line will land higher.
Here’s how that breaks down for common Houston scenarios:
- Torsion spring replacement (pair): $180 – $340
- Extension spring replacement (pair): $180 – $300
- Safety cable installation on extension spring door: $130 – $250
- Spring inspection and adjustment (no break): $120 – $200
The wildcard is what we find once the door is open: rusted brackets, a cable that’s fraying, a track that’s out of alignment because the spring snapped unevenly. We’ll show you each item in person and quote it before we touch it. Estimates are free, so you’ll know your exact number before you decide anything.
Why Houston Homeowners Call Bramwell Garage Doors Houston for Clopay Work
We’ve been at this since 2001, and Mike Ellery runs the Houston operation with a rule that’s never changed: know what’s broken, know what it costs, then decide. That’s the whole conversation. Our techs are background-checked, uniformed, and they work on Clopay doors every week, which means they’re not reading a manual in your driveway while your car’s trapped in the garage.
Every repair gets the Kingswell Guarantee in writing: a real arrival window, a written price before work starts, a clean job site, and a written promise on the repair itself. If a covered repair fails within a year, Bramwell comes back and fixes it at no charge. That’s the 365-Day Done Right Promise, and it’s on paper, not just said at the door. We also service the other brands sitting next to your Clopay in Houston garages, including LiftMaster, Chamberlain, and Genie openers, so one call usually covers everything you’ve got.
FAQs
Replacing a spring with the correct spec won’t void your Clopay door warranty, and if your door is still under coverage, we’ll verify what Clopay will and won’t honor before we choose a part. Call (903) 989-4180 with your door’s serial number and we’ll tell you where you stand before you spend a dollar of our money.
In most Houston neighborhoods, yes. We carry the common Clopay spring sizes on our trucks, so a straightforward torsion spring replacement on a Gallery or Coachman door is typically done the same visit. If you have a TorqueMaster tube or a Reserve line door, call us first and we’ll arrange to have the right part on the truck. Call (903) 989-4180 and we’ll give you a real arrival window, not a “sometime today.”
Yes. Clopay doors use a pair of springs that were installed at the same time and wear at almost the same rate. Replacing only the broken one leaves the door unbalanced and the old spring under extra load, which usually means you’ll see us again inside a year. Replacing both costs more on that first invoice, but it’s cheaper than two service calls.
Sometimes. When your Clopay door is under warranty or the door’s weight demands a very specific spring rating, we use OEM Clopay parts. When a higher-cycle aftermarket spring is the better value for a Houston door that opens four times a day, we’ll tell you that and quote both options. The point is you’ll know what we’re putting in and why, before we put it in.
That heavy feel is the spring losing tension as it approaches the end of its cycle life. A torsion spring doesn’t always snap without warning; sometimes it telegraphs the failure for weeks by making the door harder to lift manually or by causing the opener to strain audibly. If your door suddenly feels heavier, call us before it fails entirely. A spring inspection costs less than a broken spring repair, and it may prevent a cable from snapping into the path of a person or a car.
The price we quote before work starts is the price you pay when we’re done. Period. If we find something else broken while we’re working, we’ll stop, show it to you, and quote it separately before touching it. You’ll never get a surprise line item on a Bramwell invoice.
Written by Marcus Ellery, Owner, Bramwell Garage Doors Houston at Bramwell Garage Doors Houston, serving Houston and nearby areas.